Thermal Printer For Tattoo Stencils

The first Thermal Printer that has been designed especially for the Tattoo Industry.

This Thermal Printer is both reliable and easy to use. No difficult programs or apps needed, all settings can be adjusted straight from the printer.
It has 4 buttons for changing printing settings, 1 button to stop the print and 1 to start printing. 6 buttons is all that is needed to produce a clean stencil print every time.

Please note: For the best stencil transfer it is best to let the machine cool down for a few minutes after 1-2 prints. To protect the machine we do not advice using it continiously. We also advise to wipe ink of the roller and other contact points regularly to avoid printing random black lines. This can be done using alcohol preps / wipes or by applying alcohol to a microfiber cloth. 

The printer includes a box of 100 Romed Alcohol Preps for cleaning the roller. 

Frequently asked Questions & Answers:

Q: The printer is printing random black lines.
A: When this happens you should clean the roller, if that does not work restore the printer to it's default settings

This can be done by doing the following:

1. Press the "stop" button and hold it for 3 seconds until you hear a beep
2. Press the "mirror" button
3. Press the "copy" button

Q: The paper is getting stuck in the printer.
A: If the machine is overheating it will cause the paper to jam. Please allow for the machine to cool down before using it again.
We recommend letting the machine cool down for a few minutes after 1-2 prints.

Technical Features:

Paper Size: A4 - A5 (Max width 210 mm)
Paper Thickness: 0.06 mm - 0.15 mm
Input voltage: AC 100-240v / 50Hz/0.46A
Power Consumption Standby: 5w